The 5 Panel Shaker MDF Barn Door features 1-1/2 inch thick doors produced using solid MDF... medium density fiberboard. The MDF BarnCraft Collection features a PRIMER white coating on both sides on which you should apply your own paint color. The 5 Panel Shaker MDF Door has the design router carved on the front or if you choose on both sides of the door. All doors in MDF series are solid and heavy. For safety, please install using two people. 

All barncraft door hardware may be used on these doors.

NOTE: If you are purchasing hardware with the doors in this series, all doors must be pre-drilled for all hardware holes in MDF doors.  The size of the hole varies with what is being mounted onto the MDF door. A clavo will be different from a Vista door pull which will be different from a wrought iron door pull. And all of these will be different from a Gage hardware which is different from a Slade hardware.

We don’t suggest GAGE hardware for MDF doors. The doors are heavy...and the other hardware models such as the SLADE bolt THROUGH the door will provide more strength and support than the GAGE model. If you DO use the GAGE hardware, be sure to drill the pilot hole the correct depth into the top of the door.  The depth of the hole should be approximately ¼” shorter than the length of the screw.

Always drill a pilot hole before you mount your door hardware to prevent mushrooming or chipping out of the MDF surface.  Drilling will create a fine dust, so always wear a respirator and eye protection. If the mounting bolt is going all the way through the MDF door, then the diameter of the hole must be slightly LARGER than the diameter of the bolt being used. If you are mounting decorative door hardware such as clavos or a metal door strap, then the diameter of the pilot hole should be slightly less than the diameter of the screw being used.

*All doors in this series are available assembled only. FedEx Freight delivers curbside. Fully built doors arrive in large box. Customers are responsible for transporting the door package from delivery truck to location. 

BarnCraft Barn Doors are meant to be used in a sliding function only, and in interior applications. 

3 based on 1 review. Leave a Review.
Product Review
Written by Drew C Polinski on Jan 21st 2021

The product selection process, self service ordering, and communication with Barndoorz was great. The product itself was package very well and arrived completely intact. The reason this didn't get a better review was for two points. First the rail bolt points should be set at 16" on center to align more directly with standard home stud spacing to provide support for the door which weighs over 120lbs and requires the rail to support a considerable load. Furthermore the instructions weren't very descript and called for using a 5/16 inch drill bit for the pilot holes when a bit two sizes smaller would result in the rail anchor holding the rail in place. This resulted in the weight of the door causing the rail to sag and the bolts unable to effectively hold into the header board I used where this no stud. It is now impossible for me to level the rail and create a smooth operating door. This sag also causes the rollers to contact the rail bolts while the door is sliding across the rack. Otherwise the quality of the product itself was exceptional.

Leave a Review
$939.00

Shaker 5 Panel Barn Door

Add to Wishlist
Current Stock:
Free Shipping: Starting $939
Finish Options None Selected *
Rolling Hardware Options None Selected *
Front Pull Handles None Selected *
Back Pull Handles None Selected *